Applying Sewing Attributes To Lines And Regions - Brother PE-DESIGN PLUS Operation Manual

Applying Sewing Attributes to Lines and
Regions
Setting the sew type
The Sewing Attributes pane allows you to set the
embroidery attributes.
b
Memo:
The following embroidery patterns have an
outline and inside region. Sewing for this line
and region can be turned on or off, and their
thread colors and sewing attributes can be
specified.
• Patterns imported from the "Shapes"
category of Design Library
• Individual patterns of an ungrouped
pattern created with the Auto Punch
function
■
Line sew Region sew
/
Click the Sewing Attributes tab. If the Sewing
Attributes tab is not displayed, click the View tab
in the Ribbon, and then click Sewing Attributes.
switches on/off line sewing,
off region sewing.
b
Memo:
When line sewing or region sewing is
switched off, it is not sewn (and the color or
sew type cannot be selected).
On: The Line sew type/Region sew type
selector are displayed.
Off: The Line sew type/Region sew type
selector are not displayed.
Line sew Line sew type
Arranging Embroidery Designs
Line sewing on:
Region sewing on:
■
Sew type
Use these to set the sew type for outlines, inside
regions, and text patterns.
Click in a sew type selector, and then click the
desired sew type.
switches on/
Object type
Shapes
c
Region sew Region sew type
 The available settings that appear differ
depending on the object that is selected.
Line sew type
settings
Text None
Zigzag,
Running
"Line sew / Region sew" on page 45 and
"Specifying sewing attributes" on page 46
Line sewing off:
Region sewing off:
Region sew type
settings
Satin,
Fill,
Prog. Fill
(programmable fill)
Satin,
Fill,
Prog. Fill
(programmable fill)
45