Specifying The Underlay Stitch Length; Changing The Inset Distance - Brother Pacesetter BES Lettering Instruction Manual

5 Adjust any of the other settings. Refer to the related
procedures for more information.
6 Click Apply.
Specifying the Underlay Stitch
Length
You can specify the stitch length for your underlay stitches. You
can increase or decrease the length according to your underlay
needs.
To specify the underlay stitch length:
1 Select the segment.
2 In the Properties Panel, scroll down to the Underlay area.
3 Select one or more of the following underlay types you want
to use: Contour, Parallel, Perpendicular, Zig-Zag, Full
Lattice, or Lattice.
When you select underlay types, you will be able to see what
your underlay type will look like in the Preview area.
4 In the Stitch Length box, enter the stitch length that you want
for your underlay stitches.
5 Adjust any of the other settings. Refer to the related
procedures for more information.
6 Click Apply.

Changing the Inset Distance

You can change the inset distance. Pacesetter BES Lettering
calculates the inset distance (the distance the underlay stitches
are placed from the edge of the top stitching.) Inset distance
changes the amount of underlay coverage. The smaller the
inset distance, the more coverage you have.
To change the inset distance:
1 Select the segment.
2 In the Properties Panel, scroll down to the Underlay area.
Text Properties 79