Specifying The Underlay Density; Specifying The Underlay Stitch Length - Brother BES Monogramming Suite Instruction Manual

64 Pacesetter BES Monogramming Suite
Instruction Manual
When you select underlay types, you will be able to see what
your underlay type will look like in the Preview area.
4 Adjust any of the other settings. Refer to the related
procedures for more information.
5 Click Apply.

Specifying the Underlay Density

You can specify the density for underlay stitches in the
Properties Panel.
To set the underlay density:
1 Select the monogram segment.
2 In the Properties Panel, scroll down to the Underlay area.
3 Select one or more of the following underlay types you want
to use: Contour, Perpendicular, Parallel, or Zig-Zag
4 In the Density box, enter a density value.
5 Adjust any of the other settings. Refer to the related
procedures for more information.
6 Click Apply.
Specifying the Underlay Stitch
Length
You can specify the stitch length for your underlay stitches. You
can increase or decrease the length according to your underlay
needs.
To specify the underlay stitch length:
1 Select the monogram segment.
2 In the Properties Panel, scroll down to the Underlay area.
3 Select one or more of the following underlay types you want
to use: Contour, Perpendicular, Parallel, or Zig-Zag
When you select underlay types, you will be able to see what
your underlay type will look like in the Preview area.