Adjusting The Position Of The Panels - Brother BES Monogramming Suite Instruction Manual

Adjusting the Position of the Panels

By default, when you first open the software, the Properties and
Sequence View panels appear "docked" in your workspace.
However, there are ways to move any of the panels around into
different positions; you can "float" them above the workspace, in
which case they can be moved anywhere on your desktop; or
you can undock them from their current positions and dock them
elsewhere.
You can also combine panels together by "tabbing" them; you
do this by floating a panel in front of another panel and then
docking it to that panel with the tab
To float a docked panel:
1 Right-click on the panel's title bar (the grey area at the top of
the panel, which shows the panel's name, e.g. "Properties").
You will see a menu of options.
2 Select Floating from this menu.
The panel now floats above the workspace; you can drag and
place it anywhere on your screen.
If you wish to re-dock the panel to the same location it was
originally, you can just right-click the title bar again and select
"Docking" from the menu; the panel will immediately go back to
the former location. To dock it elsewhere, follow the steps under
"To dock a floating panel".
To hide a panel:
1 Right-click on the panel's title bar.
You will see a menu of options.
2 Select Hide from this menu.
Learning about the Workspace 23
button.