Creating Embroidery Patterns; Getting Started; Starting Up Application - Brother PE-DESIGN PLUS Operation Manual

Creating Embroidery Patterns

Starting Up Application

Starting up PE-DESIGN
PLUS
Click , then All Programs, then PE-DESIGN
PLUS, and then click PE-DESIGN PLUS.
10

Getting Started

About the Top Wizard
When PE-DESIGN PLUS starts up, the following
wizard appears.
(1) (2)
(4)
(5)
(1) New
Click this button to begin creating a new
pattern.
(2) Open PES
Click this button to open embroidery data
(.pes).
c
"Opening a PE-DESIGN PLUS file" on
page 48
(3) Image To Stitch
Click this button to start the wizard for
creating an embroidery pattern from an
image.
c
"Using the Photo Stitch 1 function to
create an embroidery pattern from an
image" on page 11
(4) Most Recently Used Files
Click the name of a file from the list, and
then click Open.
(5) Always show Wizard at Startup
Select this check box to start up the
wizard each time PE-DESIGN PLUS is
started up.
(3)