Exit; I Option; Select System Unit; Help - Brother print server Installation Manual

Click [File], then [Print Preview] from the
2
menu bar.
An image of the pattern selected for printing is displayed.
The information that will be printed differs
depending on the specified Print Setup set-
tings. (See page 10, "Print Setup").
Click [Close] to close the dialog box.
3
G G

Exit

Function
Quits the application.
Operation
Click [File], then [Exit] from the menu bar.
1
The application quits immediately.
Option
G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
G G

Select System Unit

Function
Allows you to select the unit of measurement (millimeters or inches).
Operation
Click [Option], then [Select System Unit] from
1
the menu bar.
The Select System Units dialog box appears.
Select the appropriate units (mm or inch).
2
Click [OK] to confirm the setting.
3
N Click [Cancel] to stop the operation.

Help

G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
G G

Contents

Function
Displays the help for this application.
12