Moving Parts Of The Design - Brother BES Monogramming Suite Instruction Manual

58 Pacesetter BES Monogramming Suite
Instruction Manual
3 Click and drag the rotation bead to adjust the box to the
angle you want.
The angle you have rotated the object will be shown (in degrees)
on the status line, in the bottom-left corner of the workspace.

Moving Parts of the Design

There are a couple of ways to move objects in your design
around relative to one another.
Moving Segments Manually
You can move segments around your design by dragging them
to another location.
To move an object or a copy of an object manually:
1 On the Ribbon, click the Select
2 Select the objects, or group of objects.
The object you have selected will be enclosed in a selection
box, with handles.
3 Click on the "x" in the center of the selection box, and drag
the object or group to its new location.
As you drag, the status line displays the horizontal (dx) and
vertical (dy) distance.
Nudging Segments
Nudging moves the selected object or group of segments, a
very small distance at a time. Nudging is similar to dragging the
object but the distance that the object moves is smaller, giving
you finer control.
To nudge an object or group of segments, select it and then
press the Ctrl key plus one of the up, down, left or right arrows
on your keyboard.
tool.