Using The Enclosure Window; Accessing The Enclosure Display - Acer Altos RAIDWatch Manual

Management program
Table of Contents

Advertisement

Altos RAIDWatch User Guide
Figure 4–25
The message tag shown in Figure 4–25 provides information such as primary and secondary IDs, and
the current transfer clock rate.
The Physical View also allows you to modify the configuration of the drive and host channels, and
scan in newly added or replaced physical drives. It also provides host channel LUN configuration;
and remote enclosure monitoring SES.
To display host channel LUN configuration information, click on a host channel icon in the
navigation panel, then click on the channel ID in the sub-navigation panel (lower-left quadrant of
the window). For more information about modifying these configurations, see Chapter 5 , "Array
Management", on page 71
4.6.4.1
SES
In addition to displaying drive and host channels, the Physical View can also display
Management devices
devices" icon in the
SES is an interface by which signals from enclosure sensors are passed to the RAID controller. It
provides a basic status report on enclosure devices and system parameters like power supplies, fans,
and voltage.
Altos RAIDWatch Manager will display the SES Management devices under Physical View. Click on
the icon to show status. SES is not user configurable via Altos RAIDWatch Manager.

4.7 Using the Enclosure Window

The Enclosure window allows you to define enclosures for creating an exact replica of the disk
array's drive bay arrangement, displaying the exact location of the physical drives and controllers.

4.7.1 Accessing the Enclosure Display

To open the Enclosure window display either select the Enclosure icon from the navigation button
shown in Figure 4–9 or select the Enclosure command from the Open menu shown in Figure 4–10.
The command allows you to access the pre-configured enclosure(s). If multiple enclosures have
been defined by system vendor, you may select your enclosure from the selection box shown in
Figure 4–26
64
Physical view navigation Panel Icons Message Tag
. To open view the
Physical View
navigation panel.
SES Management devices
SES
click on the "SES Management

Advertisement

Table of Contents
loading

Table of Contents