Table of Contents
Advertisement
Altos RAIDWatch User Guide
Figure 8–47
3
After selecting the "Operation" tab, a new window will appear in the contents panel. Select the
"Expand" tab shown in Figure 8–48.
Figure 8–48
4
Once the "Expand" tab has been selected the "Expand Logical Volume" window shown in Figure
8–49 will appear in the content panel.
Figure 8–49
8.3.3.2
Setting LV Expansion Parameters
Maximum Free Capacity
This is a read only field and cannot be configured by the end user. This field informs the user as to
the maximum available memory that can be used.
Size to Expand
Enter a value that is not larger that the value shown in the Maximum Free Capacity field. The LV
will be expanded by the amount entered in this field.
Note
You may combine partitions under View and Edit LV Partition Table by expanding the size of earlier
partitions (as in, increase the size of partition 0 so that it is as large as all partitions combined to
make one partition). Combining partitions destroys existing data on all drive partitions.
8.3.3.3
Click "OK" to Initiate LV expansion
To initiate the LD expansion, follow these steps:
1
Once the LV expansion parameters have been selected, click the "OK" button at the bottom of the
Expand Logical Volume window.
114
Select Operation
Select Expand
Expand Logical Drive Window
Advertisement
Table of Contents
