Table of Contents
Advertisement
2
A confirmation window shown in Figure 8–50will appear. If you are certain that you want to create
the LV with the settings you have selected, click the "OK" button.
Figure 8–50
3
If you selected the "OK" button in the "Please Confirm" window the "Create In Progress" content
window will display logical volume expansion progress.
4
The logical drive will now have a new last partition the same size as the expansion. Look at the View
and Edit LD Partition Table to verify this.
8.3.4 Delete a Logical Volume
1
Select the "Logical Volume" icon from the Logical View Navigation Panel shown in Figure 8–1. As
shown in Figure 8–51, all the LVs that have been created will appear below the "Logical Volume"
icon.
Figure 8–51
2
From the list shown in Figure 8–46, select the LV that you wish to delete. Once this LV has been
selected a "View and Edit LV Partition" table will appear in the content panel. At the top of this
window the two tabs ("Partition" and "Operation") shown in Figure 8–47 will appear. Select the
"Operation" tab.
Figure 8–52
Confirm LV Expansion
List of LVs
Select Operation
Drive Management
115
Advertisement
Table of Contents
