Table of Contents
Advertisement
4.5.5 Menu Commands
The following commands only appear in the
shown in Figure 4–10.
Figure 4–10
• The Agent command under the Connect menu brings up the "Connect to RAID agent" prompt.
This command is only available when Altos RAIDWatch Manager is not currently connected to
any agents.
• The Exit command under the Connect menu is always available and is used to end the current
Altos RAIDWatch Manager session.
• The Contents command under the Help menu brings up the main navigation window for the
Altos RAIDWatch Manager help file.
• The About command under the Help menu brings up a window that provides Altos RAIDWatch
version information.
4.5.6 Windows Display Area
The windows display area is where the system displays Altos RAIDWatch Manager windows. You
have the option to arrange the displayed windows on this area in various ways depending on your
specific needs.
• The View menu provides you with commands to arrange windows. For information on how to
do this see section 4.9.3, "Arranging Windows", on page 68
• Controller Time, shown at the top right hand corner of the screen, shows the current controller
date and time settings (see Figure 4–11).
Figure 4–11
• The status bar at the bottom of the Window (see Figure 4–12) displays the results of various
disk array operations.
Menu Commands
Controller Time
Navigation Menus
described in section 4.5.2 and
.
Operation
57
Advertisement
Table of Contents
