Raid; Controller - Acer Altos RAIDWatch Manual

Management program
Table of Contents

Advertisement

6.6 RAID

To be able to configure the Disk Array parameters, select the "RAID" tab, as shown in Figure 6–8,
from the Configuration View Window Tabs.
Figure 6–8
Figure 6–9
• Disk Array Parameters (choose from each range as shown in Figure 6–9):
• LD Rebuild Priority. Available selections: Low, Normal, Improved, High.
• Write Verify On LD Initialization. Choose Enabled or Disabled.
• Write Verify On LD Rebuild. Choose Enabled or Disabled.
• Write Verify On Normal Drives Access. Choose Enabled or Disabled.

6.7 Controller

To be able to view and configure the Controller parameters, select the "Controller
in Figure 6–10 from the
Figure 6–10
Select the RAID Tab
Disk Array Parameters
Configuration View Window
Select the Controller Tab
Controller Configuration
Tabs.
"
tab, as shown
79

Advertisement

Table of Contents
loading

Table of Contents