Table of Contents
Advertisement
Altos RAIDWatch User Guide
Once the additional components have been selected, and if you wish to proceed with the
installation process, select the "Next" button. If you do not wish to proceed with the installation
process, select the "Stop" button and if you wish to re-select the installation options, then select
the "Back" button.
Figure 2–5
4
If the "Next" button from Figure 2–4 was selected, the Install Active window shown in Figure 2–5
will appear. If you wish to stop the installation procedure, then click the "Stop" button. If you wish
to continue installing the
installation process uninterrupted.
5
Once the
successful installation, shown in Figure 2–6, will appear. To complete the process and to make the
window disappear, click on the "OK" button.
18
Installing Active
Out of Band
Out of Band
components have been successfully installed, a window indicating the
components, allow the installation shield to continue the
Advertisement
Table of Contents
