Figure 3–9
• Phone Number: The phone number for an event message receiving fax machine. (Note that
any access dialing requirements, such as accessing an outside line, must be included in the
phone number. For example: 9,,,2241603 wherein "9" is access for an outside line and ",,,"
indicates a pause.)
• Severity is the parameter used to determine what levels of events to be sent via FAX (1, all
levels; 2, Warning and Alert; 3, only Alert).
• Available phone numbers: A list of all phone numbers that the NPC will use to send a message
to. The numbers and the severity of the messages that will be sent to the number shown are
listed.
3.5.3 Pager Settings
To open the "Pager" window, first open the
Pager
select the
are two sub-tabs in the Pager configuration window, "Base Settings" and "Phone Number List"
Figure 3–10
FAX Phone Number List
Pager
sub-tab. The
configuration window shown in Figure 3–10 will appear. There
Enable device
NPC Settings
window shown in Figure 3–6, and then
Configuration Options
39