Table of Contents
Advertisement
Appendix A
Command Summary
This appendix describes the commands available in Altos RAIDWatch Manager. These commands
are presented either in menus or as command buttons on the toolbar.
A.1 Menu Commands
This section lists and explains the commands available from the menus in the menu bar. Keyboard
strokes for commands that can also be executed from the keyboard are indicated by angle brackets.
For example:
Connect
means that you can connect to a disk array system by selecting Connect from the File menu or by
pressing the
Table A–1
Command
Connect <C>
Disconnect <D>
Agent <A>
Exit <X>
Enclosure <E>
<C>
"C"
key on your keyboard.
Altos RAIDWatch File Menu Commands
Description
Connects Altos RAIDWatch Manager to a particular disk array system for
management. This command has the same function as the Connect command
button on the toolbar.
Disconnects from the current disk array system, terminating the current
management session with the device but not exiting Altos RAIDWatch
Manager.
Activates the Connect to RAID Agent dialog box.
Closes the Altos RAIDWatch Manager application.
Displays the Enclosure window. This command has the same function as the
Enclosure command button on the toolbar.
Command Summary
173
Advertisement
Table of Contents
