Table of Contents
Advertisement
Altos RAIDWatch User Guide
Figure 3–13
• Receiver's Email: Allows users to enter multiple event notification e-mail recipients with
• Severity: The parameter used to determine what levels of events to be sent via Email (1, all
• Available Addresses: Shows a list of all the email addresses that the NPC will use to send a
3.5.5 SNMP Settings
To open the "SNMP" window, first open the
select the
are two sub-tabs in the
Figure 3–14
3.5.5.1
Base Settings
To configure the "Base Settings" select the "Base Settings" sub-tab from Figure 3–14 and the
configuration options shown in Figure 3–14 will appear.
42
Email Settings
messages for each. Each entry must be a valid internet e-mail address.
levels; 2, Warning and Alert; 3, only Alert).
message to. Both the email addresses and the severity of the messages that will be sent to the
addresses shown are listed.
SNMP
sub-tab. The SNMP configuration window shown in Figure 3–14 will appear. There
SNMP
SNMP Base Settings
NPC Settings
configuration window, "Base Settings" and "SNMP Traps List".
window shown in Figure 3–6, and then
Advertisement
Table of Contents
