Table of Contents
Advertisement
Figure 9–14
LD partitions
7
From the LUN Selected drop-box shown in Figure 9–15, choose the LUN ID to assign. Only unused
IDs will be listed.
Figure 9–15
Selecting LUN ID
8
Next, double-click on the icon of the partition you would like to map. The partition should appear,
as shown in Figure 9–16, in the Partition Selected box. Click OK and enter the password when
prompted.
Figure 9–16
Selected Partition
9
To map additional partitions, repeat step 7and 8 listed above.
10
Once all partitions have been mapped, if you choose the LUN Table tab as shown in Figure 9–17,
the newly mapped LUNs should appear in the LUN table.
LUN Mappimg
127
Advertisement
Table of Contents
