Table of Contents
Advertisement
Altos RAIDWatch User Guide
4.1.1.2
Under Unix or AIX Operating Systems (Solaris 7 SPARC or x86, HP UX 11, or
Red Hat Linux 6.1)
Under Unix systems the Primary Agent, Secondary Agent and NPC (which are all installed on the
host computer) must be started manually each time the host computer is reset. These items must
be started in the following order:
• First start the secondary agent,
• Second start the primary agent,
• Third start the NPC
To start the Primary Agent, Secondary Agent(s) under a Unix system:
1
At the host computer, change directories to:
/usr/hybrid/bin/ (or whatever directory you chose during the installation if not the default)
2
Then at the command line, type:
primary <Enter>
secondary <Enter>
npc <Enter>
Altos RAIDWatch is now running. The next step is to start the GUI part of the software, Altos
RAIDWatch Manager.
4.2 Starting Altos RAIDWatch Manager
The GUI management interface, Altos RAIDWatch Manager, needs to be started by a network or
RAID systems manager regardless of which OS is being used.
Depending on your setup, you can start Altos RAIDWatch Manager in various ways.
For both local and distant management, and under various Operating systems, starting the
program is fairly simple. Please refer to the appropriate sub-section below for information.
4.2.1 Starting Altos RAIDWatch Manager Locally or via LAN
under the Windows (95/98/Me/NT/2000/XP)
Environment
1
From the Start menu, select
or,
48
-- to start the Primary Agent
-- to start the Secondary Agent
-- to start the Secondary Agent
Programs --> Altos RAIDWatch Manager
.
Advertisement
Table of Contents
