Table of Contents
Advertisement
Altos RAIDWatch User Guide
8.2.2.2
Selecting Drives
1
The "Available" menu in Figure 8–2 shows the drives that are can be used to create LDs and the
channels to which they have been assigned.
To select the physical drives that will be used in the LD either:
Figure 8–3
or,
2
After clicking the "Add" (or "Add All") button, the drives that were selected will be removed from
the "Available" menu and appear in the "Selected" window on the right hand side. See Figure 8–4.
Figure 8–4
Note
If the "Add All" button was selected, all the drives that previously appeared in the "Available"
menu should now appear in the "Selected" menu.
92
a Select the physical drives you wish to incorporate into a LD and click the "Add" button
beneath the "Available" menu. See Figure 8–3.
Selecting Logical Drives
b If you wish to use all the available drives to create a logical drive, click the "Add All" button
that appears beneath the "Available" menu (SeeFigure 8–3).
Selected Logical Drives
Advertisement
Table of Contents
