Table of Contents
Advertisement
Figure 8–28
2
Click the Add button in Figure 8–28, then click either Local or Global. Local spares will only replace
failed drives in the same logical drive. Global spares will replace any drive that fails in any logical
drive on the RAID controller.
3
A confirmation screen will appear. If you are certain you wish to add the spare then click the "OK"
button.
Note
Spare drive assignments can also be made when scanning in new drives under Physical View.
8.2.5.3
Deleting a Spare Drive Assignment
1
Access the 'Spare Drive Management" window shown in Figure 8–288.
2
To delete a spare drive, select the Delete tab shown in the Spare Drive Management window. A
new screen, shown in, will appear.
Spare Drive Management Window
Drive Management
103
Advertisement
Table of Contents
