Table of Contents
Advertisement
3
If you selected the "OK" button in the "Please Confirm" window the "Create In Progress" content
window shown in Figure 8–13 on page 95 will display logical drive creation progress.
Figure 8–45
8.3.3 To Expand a Logical Volume
When logical volumes are expanded by adding new logical drives, additional capacity can be added
to existing logical volumes.
8.3.3.1
Opening the "Expand Logical Volume" Window
1
Select the "Logical Volume" icon from the Logical View Navigation Panel shown in Figure 8–1 on
page 90. As shown in Figure 8–46, all the LVs that have been created will appear below the "Logical
Volume" icon.
Figure 8–46
2
From the list shown in Figure 8–46, select the LV that you wish to expand. Once this LV has been
selected a "View and Edit LV Partition" table will appear in the content panel. At the top of this
window the two tabs ("Partition" and "Operation") shown in Figure 8–47, will appear. Select the
"Operation" tab.
Create in Progress
List of LVs
Drive Management
113
Advertisement
Table of Contents
