Receiving A Second Call (Answering Call Waiting) - Panasonic KX-NT400 Operating Instructions Manual

Basic Feature Operation
Holding a Call in a System Parking
Zone (Call Park)
You can hold a call in a common parking zone. Calls
held in a parking zone can be retrieved by any
extension.
You can put a call in either an idle parking zone
(automatic) or a specified parking zone (manual).
Operation in Line Buttons mode
To hold the current call in an idle parking zone
1.
On the Calls screen, press
2.
Press
The display indicates the parking zone that the call
was held in.
3.
Go on-hook.
To hold a call in a specified parking zone
1.
On the Calls screen, press
2.
Press , and then enter the number of the
parking zone to park the call in.
When you enter the parking zone number, use 2
digits (e.g., 04).
A window appears indicating the parking zone the
call was held in.
3.
On the window, press OK.
4.
Go on-hook.
To retrieve a parked call
1.
Press , and then enter the number of the
parking zone to retrieve the call from.
When you enter the parking zone number, use 2
digits (e.g., 04).
2.
Go off-hook.
Operation in Call List mode
To hold a call in an idle parking zone
1.
On the Calls screen, select the call you want to
hold.
2.
Press Park the call (Automatic).
A window appears indicating the parking zone the
call was held in.
3.
On the window, press OK.
70 Operating Instructions
(TRANSFER).
.
(TRANSFER).
4.
Go on-hook.
To hold a call in a specified parking zone
1.
On the Calls screen, select the call you want to
hold.
2.
Press Park the call (Manual).
3.
In the Park the call window, use the dial keys to
enter the number of the parking zone you want to
hold the call in.
–or–
Press and to increase and decrease the
parking zone number incrementally.
4.
Press OK.
A window appears indicating the parking zone the
call was held in.
5.
On the window, press OK.
6.
Go on-hook.
To retrieve a parked call
1.
On the Calls screen, select the call you want to
retrieve.
2.
Press Unpark the call, and go off-hook.
Usage tips
•
You can retrieve a call that was parked by another
extension by using the procedure "To retrieve a
parked call" in "Operation in Line Buttons mode
(Page 70)".
•
If a call is not retrieved within a specified time, you
will hear an alarm as a reminder (Call Park Recall).
If an outside call is not retrieved within a specified
time, it is automatically disconnected.
•
If you hear a reorder tone when retrieving a parked
call, there is no held call. Confirm the stored parking
zone number.
•
After you park a call, you can perform other
operations.
Receiving a Second Call
(Answering Call Waiting)
During a conversation, if a second call arrives, the Call
Alert window appears. You will also hear a call waiting
tone.
Document Version 2010-01