Installation and Settings
Connections
This section explains the ports and connectors on the KX-NT400.
Connections for Ethernet/PC/AC Adaptor
CAUTION
AC adaptor (Optional)
•
Use a Panasonic AC adaptor KX-A420 (PSLP1662).
•
When the optional AC adaptor is used, that is the main disconnect device to stop electricity supply.
Ensure that the AC outlet is located near the unit and is easily accessible.
When connecting a headset
•
Ensure that the headset cord has slack and is not pulled tight during use to prevent damage to the
connectors.
Notice
It is recommended that you use one of the following Panasonic headsets:
•
KX-TCA86
•
KX-TCA92
When selecting Ethernet cables
•
Use flexible, high-quality, snagless (without strain relief) cables. Do not use cables with coating
that may tear or crack when bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
Document Version 2010-01
Clamp
To a Switching Hub
To a PC
Optional AC adaptor
(not included)
AC adaptor
Installation and Settings
Headset
Operating Instructions
147