Holding a Call
You can put a call on hold by holding the call at your
extension.
To hold the current call
1.
Press [HOLD/
], and then go on-hook.
Note
•
For KX-UT133/KX-UT136/KX-UT248, if
Automatic Call Hold is enabled on your unit,
the call will also be put on hold if you press
a DN button (flexible button) other than the
one for the current call. For details, consult
your administrator or dealer.
To retrieve a call on hold at your extension
1.
Go off-hook.
2.
Do one of the following, depending on your unit:
For KX-UT113/KX-UT123 users
•
Press [HOLD/
For KX-UT133/KX-UT136/KX-UT248 users
•
Press the green flashing DN button (flexible
button).
Note
•
If a call is not retrieved within a specified time,
you will hear an alarm as a reminder (Hold
Recall).
•
For details about DN buttons, see "Flexible
Buttons (KX-UT133/KX-UT136/KX-UT248
only) (Page 39)".
Document Version 2013-03
].
Receiving a Second Call
(Answering Call Waiting)
During a conversation, if a second call arrives, you will
hear a call waiting tone.
You can answer the second call by disconnecting or
holding the current call.
To disconnect the current call and then talk to
the new party
1.
Go on-hook while hearing the call waiting tone.
2.
Go off-hook.
To hold the current call and then talk to the new
party
For KX-UT113/KX-UT123 users
1.
Press [HOLD/
] while hearing the call waiting
tone.
For KX-UT133/KX-UT136/KX-UT248 users
1.
Press [HOLD/
] while hearing the call waiting
tone.
2.
Press the green flashing DN button (flexible button).
Note
•
For KX-UT133/KX-UT136/KX-UT248, if
Automatic Call Hold is enabled on your unit, you
do not need to press [HOLD/
call is automatically put on hold when you press
the DN button. For details, consult your
administrator or dealer.
•
For details about DN buttons, see "Flexible
Buttons (KX-UT133/KX-UT136/KX-UT248
only) (Page 39)".
Feature Operations
] in step 1. The
Operating Instructions
33