Bluetooth Headset Operation - Panasonic KX-NT400 Operating Instructions Manual

Bluetooth Headset Operation

The KX-NT307 Bluetooth module allows third party
Bluetooth headsets to be used with the KX-NT400. It is
not guaranteed that all features of the Bluetooth
headset will be available when used with the
KX-NT307 Bluetooth module.
Note
•
One Bluetooth headset can be registered with
the module.
•
The KX-NT307 Bluetooth module supports
Bluetooth devices that use the headset profile
(HSP) and hands-free profile (HFP).
Registering the Bluetooth headset
Set the headset pairing mode by following the
instructions provided with the Bluetooth headset.
1.
Press the Options tab > Administrator Options >
Programming.
2.
On the Programming screen, press PROG.
3.
Press .
4.
Press (ENTER).
5.
Enter the Pass Key for your Bluetooth headset and
then press (ENTER).
For more information regarding the Pass Key, see
the documentation for your headset, or consult the
Bluetooth headset's manufacturer.
•
When registration has been completed, you will
hear a confirmation tone.
•
If you hear a warning tone, confirm the
Bluetooth headset's Pass Key, press
(CANCEL), and repeat this step.
6.
Press EXIT to exit programming mode.
Note
•
If you have already registered a Bluetooth
headset that you do not want to use anymore,
register the correct headset.
Document Version 2010-01
•
For more information about confirmation and
warning tones, refer to the Operating Manual of
the PBX.
Assigning a Headset Mode button
A flexible key can be assigned as a Headset Mode
button.
The Headset Mode button can be used to turn Headset
Mode on and off. A flexible button assigned as the
Headset Mode button displays Headset Mode status as
follows:
•
Red: Headset Mode on
•
Off: Headset Mode off
1.
Press the Options tab > Administrator Options >
Programming.
2.
On the Programming screen, press PROG.
3.
Press the flexible button you want to assign.
4.
Press , and then press
Confirming the ID of the Bluetooth headset and
de-registering the Bluetooth headset
1.
Press the Options tab > Administrator Options >
Programming.
Installation and Settings
(ENTER).
Operating Instructions 155