Initializing The Kx-Nt400; Restarting The Kx-Nt400 - Panasonic KX-NT400 Operating Instructions Manual

Installation and Settings
Chat Log (Export Only)
Select the check box to export the chat log.
For details about the chat log, see "Chat
(Page 83)".
Note
SD Memory Card Information
Confirm the following before using an SD memory
card.
•
A compatible card is inserted (see "Compatible
SD Memory Cards (Page 181)").
•
The SD memory card has been formatted using
the correct format (see "Formatting SD Memory
Cards (Page 182)").
•
The SD memory card is not locked (see "Write
Protection (LOCK) (Page 181)").
•
Data stored on SD memory cards can be
corrupted if the card is exposed to
electromagnetic fields, static electricity, etc. We
recommend to back up important data stored on
SD memory cards.
•
The KX-NT400 cannot delete the contents of
the SD memory card unless you format it.
Use computers to individually delete the
contents of an SD memory card.

Initializing the KX-NT400

You can initialize the KX-NT400 to reset all settings to
their default values. This feature is only accessible from
the Setup screen.
For details about initializing the KX-NT400, see "Setting
Initialize (Page 165)".
168 Operating Instructions

Restarting the KX-NT400

Automatic Restarting
When you change certain settings, the KX-NT400
restarts automatically.
On the Setup screen
During the setup procedure, when you change settings
on the following screens, the KX-NT400 automatically
restarts after you press Close on the Setup screen.
•
Language Settings (Page 159)
•
IP Address Settings (Page 159)
•
IP Port Settings (Page 160)
•
Quality of Service (QoS) Settings (Page 161)
•
Firmware Version Update (Page 163)
•
Setting Initialize (Page 165)
Note
•
For details about the Setup screen, see
"Setting Up the KX-NT400 (Page 157)".
On the Options screen
During normal use, when you change settings on either
of the following screens, the KX-NT400 restarts
automatically after you press OK on the respective
screen.
•
Display Settings (Page 113)
•
Language Settings (Page 115)
*1 Restarting occurs only when Display Color is changed.
Manual Restarting (System Reset)
When the settings for the KX-NT400 have been
changed via the PC Maintenance Console or changes
have been made to the PBX's configuration, the
KX-NT400 requires manual restarting.
To perform a manual restart, disconnect the Ethernet
cable (when using PoE) or unplug the AC adaptor from
the power outlet.
The KX-NT400 does not have a system reset button.
Some examples of when the KX-NT400 needs to be
restarted are listed below:
•
The Forward/Do Not Disturb settings have been
changed via the PC Maintenance Console.
•
The presence status settings have been changed
via the PC Maintenance Console.
•
The floating extension number of the simplified
voice message system (SVM) or Panasonic Voice
Processing System (VPS) has changed. In this
case, make sure to set the new extension number
*1
Document Version 2010-01