Customizing the Telephone
Button
Group FWD—Intercom
calls
Account
Conference
Terminate
External Feature Access
(EFA)
Call Park
Call Park (Automatic Park
Zone)
Call Log
138
Operating Instructions
Description & Programming Input
Used to forward the intercom calls to your group to a specified
destination.
Programming Input
+ Incoming call distribution group extension no.
The Group FWD button light shows the current status as follows:
•
Off: No set
•
Red on: FWD mode
Used to enter an account code.
Programming Input
Used to establish a multiple party conversation.
Programming Input
Used to disconnect the current call and make another call without
hanging up.
Programming Input
Used to access special features offered by a host PBX or a telephone
company.
Programming Input
Used to park or retrieve a call in a preset parking zone.
Programming Input
+ Parking zone no. (2 digits)
Used to park a call in an idle parking zone automatically.
Programming Input
Used to show the incoming call information.
Programming Input
The Call Log button light shows the current status as follows:
•
Off: No incoming call. Or you have already viewed the call log.
•
Red on: You have missed calls to view.
Document Version 2010-01