Firmware Version Update - Panasonic KX-NT400 Operating Instructions Manual

Appendix

Firmware Version Update

Firmware Version Update
The firmware can be updated only in the setup procedure after connecting the KX-NT400 to a PBX.
You can use a FTP server or an SD memory card to provide the new firmware data.
For details, see "Firmware Version Update (Page 163)".
Parameter Name
FTP Server Enter the IP address for the FTP server.
Address
FTP Server Control Enter the port number for the FTP server.
Port
FTP User ID Enter the user ID for the FTP server.
FTP User Enter the user password for the FTP server.
Password
FTP Path Enter the path of the firmware data in the FTP
server.
FTP File Name Enter the file name of the firmware data.
VLAN Specify whether VLAN is used.
VLAN ID Enter the VLAN ID when VLAN is enabled.
VLAN Priority Enter the VLAN priority when VLAN is
enabled.
File Name Enter the file name and path of the firmware
data in the SD memory card.
180 Operating Instructions
Description Value Range Default Setting
Valid IP Address 0.0.0.0
21, 1024–65535 21
0–24 characters
0–24 characters
1–128 characters C:/panasonic/
nt400
1–24 characters PNT400
Enable, Disable Disable
1–4094 1
0–7 7
0–256 characters
Document Version 2010-01
–
–
–