Pbx Feature List - Panasonic KX-NT400 Operating Instructions Manual

PBX Feature List

You can use the following PBX features. For details, refer to the corresponding sections in this guide or to the
Operating Manual for the connected PBX.
Note
•
The PBX features marked with a
•
The buttons with [ ] do not exist by default. To create the buttons, see "Customizing the Flexible Buttons
(Page 133)".
Feature
Absent Message
You can show the reason you do not answer, if
the caller uses a Panasonic display proprietary
telephone.
There are eight preprogrammed messages and
one for your personal message (16 characters).
•
Presence Status Setting (Page 78)
Account Code Entry
You may give a specified account code to
extension users and check their telephone usage.
You can specify an account code for each client
and check the call duration.
Alternate Calling—Ring/Voice
The caller can alternate the alerting method,
either ring or voice, when making an intercom call.
On the other hand, any extension can set the
alerting method, either ring or voice, when
receiving an intercom call.
Automatic Callback Busy
You can set the telephone to receive callback
ringing:
•
when a dialed extension becomes idle.
(After you answer the callback ringing, the
previously dialed extension number is
automatically redialed.)
•
when your desired CO line that is in use by
another extension becomes idle.
(After you answer the callback ringing, you
can make a call using the seized CO line.)
•
Reserving a Busy Line (Automatic Callback
Busy) (Page 87)
Document Version 2010-01
icon are only available for the manager extension.
To set
+
To cancel
+ account code +
To set
To cancel
PBX Feature List
Operation
– (parameter) +
+ outside phone no.
Operating Instructions 89