Customizing the Flexible Buttons
You can customize the flexible buttons that are displayed on the Calls screen or the Feature Key screen (in
Call List mode) by assigning functions to them. They can then be used to make or receive outside calls or as
feature buttons.
You can customize the flexible buttons on the Programming screen.
Note
•
The flexible buttons work as Single-CO (S-CO) button by default.
Programming Screen
The flexible buttons' lights on the Programming screen indicate their status:
Button Name
FWD/DND
AUTO ANS/MUTE
INT' (INTERCOM)
To customize flexible buttons
1.
Press the Options tab > Administrator Options > Programming.
2.
On the Programming screen, press PROG.
Document Version 2010-01
Light Status
Off
Red on
Flashing red slowly
Off
Red on
Green on
Customizing the Telephone
Meaning
Both features are not set.
FWD mode
DND mode
Normal
Auto Answer ON
The extension is seized by you.
Operating Instructions
133