Administrator Options - Panasonic KX-NT400 Operating Instructions Manual

Appendix

Administrator Options

Network—IP Address
These parameters are editable only during setup, after connecting the KX-NT400 to a PBX. On the Options
screen, you can only view these parameters. For details about editing these parameters, see "IP Address
Settings (Page 159)".
Parameter Name
DHCP Specify whether DHCP is used.
VoIP IP Address Enter the VoIP IP address when DHCP is
disabled.
Application IP Enter the application IP address when DHCP
Address is disabled.
Subnet Mask Enter the subnet mask when DHCP is
disabled.
Default Gateway Enter the default gateway address when
DHCP is disabled.
PBX IP Address 1 Enter the PBX IP Address 1.
PBX IP Address 2 Enter the PBX IP Address 2.
PBX Change Time Enter the length of the time before the failover
process starts.
Network—IP Port
These parameters are editable only during setup, after connecting the KX-NT400 to a PBX. On the Options
screen, you can only view these parameters. For details about editing these parameters, see "IP Port Settings
(Page 160)".
Parameter Name
PTAP Server Enter the IP port number for the PTAP server.
(IP Port 1)
PTAP Client Enter the IP port number for the PTAP client.
(IP Port 1)
PTAP Server Enter the IP port number for the PTAP server.
(IP Port 2)
PTAP Client Enter the IP port number for the PTAP client.
(IP Port 2)
Network—QoS
These parameters are editable only during setup, after connecting the KX-NT400 to a PBX. On the Options
screen, you can only view these parameters. For details about editing these parameters, see "Quality of Service
(QoS) Settings (Page 161)".
176 Operating Instructions
Description
Description
Value Range Default Setting
Enable, Disable Enable
Valid IP Address
Valid IP Address
128.0.0.0–
255.255.255.254
Valid IP Address
Valid IP Address
Valid IP Address
30–300 seconds 60 seconds
Value Range Default Setting
1024–65535 9300
1024–65535 9301
1024–65535 9300
1024–65535 9301
Document Version 2010-01
–
–
–
–
–
–