Setting Initialize; Firmware Version - Panasonic KX-NT400 Operating Instructions Manual

Setting Initialize

Initializing the settings returns all settings to their default
values.
Note
•
The password for the Application Lock will not
be initialized.
•
This operation should be performed only by an
administrator or installation personnel. An
access code is required to access this screen.
Initialize Settings screen
Reset all settings to their default values.
Initializing the settings
1.
On the Setup screen, press Initialize Settings.
2.
On the Initialize Settings screen, press Initialize.
3.
On the confirmation dialog, press OK.
The initialization process starts.
4.
When the initialization process finishes, the
KX-NT400 reboots automatically.
Document Version 2010-01

Firmware Version

You can view the firmware version of the KX-NT400 on
this screen.
Firmware Version screen
VoIP IPL Version
Shows the firmware version of the VoIP IPL.
VoIP Application Version
Shows the firmware version of the VoIP Application.
Application Loader Version
Shows the firmware version of the Application
loader.
Application Version
Shows the firmware version of the Application.
Installation and Settings
Operating Instructions 165