Error Codes - Panasonic KX-NT400 Operating Instructions Manual

Message
Connection to the FTP
server cannot be
established.
FTP download failed.
Firmware file format is
invalid.
Firmware file is invalid.
The SD Card format
feature does not support
SD Cards larger than 2G
Bytes.
The SD Card format
feature does not support
SD Cards smaller than
32M Bytes.
Failed to connect to the
LDAP server.
Failed to connect to the IP
camera.
Password is locked.
Please contact your
manager of PBX.
NT400 skipped refreshing
the PBX Data because
PBX was not ready.

Error Codes

You can view the system error messages (error codes) on the Error Log screen.
To access the Error Log screen
1.
Press the Options tab > Administrator Options > Error Log.
Document Version 2010-01
Possible Causes & Solutions
•
The file necessary for upgrading the firmware could not be
downloaded from the FTP server.
→
Check that the FTP server settings are correct.
•
The firmware could not be upgraded using the firmware
upgrade file that was downloaded from the FTP server.
•
The SD memory card is not compatible with the KX-NT400.
→
Use an SD memory card that is compatible with the
KX-NT400.
•
The KX-NT400 could not connect to the LDAP server.
→
Check the settings for the LDAP server.
•
The KX-NT400 could not connect to a network camera.
→
Check the settings for the network camera.
•
Your extension has been locked by the PBX.
→
To unlock your extension, the PIN and PIN lock for your
extension must be cleared. For details, consult your
manager.
•
The KX-NT400 could not download system speed dialing
directory and extension number directory from the connected
PBX.
→
Consult your administrator.
Appendix
Reference
Page 163
—
Page 181
Page 121
Page 116
—
—
Operating Instructions 193