Panasonic KX-NT400 Operating Instructions Manual page 93

Feature
Calling/Connected Line Identification
Presentation (CLIP/COLP)
You can select the telephone number sent, either
the number of the line used or the number
assigned to your extension.
CLIP:
When making an outside call, you can present
your preprogrammed telephone number to the
called party.
COLP:
When receiving an outside call, you can present
your preprogrammed telephone number to the
calling party.
Call Monitor
The preprogrammed extension can monitor
another extension.
Call Park
You can put a call on hold in a common parking
zone of the PBX so that any extension can
retrieve the parked call. You can use this feature
as a transferring feature.
•
Holding a Call in a System Parking Zone (Call
Park) (Page 70)
Call Pickup
You can answer an incoming call that is ringing at
another extension or group from your phone
without leaving your desk.
The following types of pickup are available:
Group Call Pickup:
Picks up a call within your group.
Directed Call Pickup:
Picks up a specified extension's call.
Call Pickup Deny
You can deny or allow other people to pick up your
calls.
Document Version 2010-01
Operation
To show the CO line number
To show your extension number
extension no. +
To set (specified)
(TRANSFER) +
To set (automatically)
(TRANSFER) +
To retrieve
+ stored parking zone no. (2 digits)
Group Call Pickup
+ group no. (2 digits)
Directed Call Pickup
+ extension no.
To deny
To allow
PBX Feature List
+ parking zone no. (2 digits)
Operating Instructions 93