Writing the embroidering data
The embroidering data stored in the memory of the machine is written to the floppy disk.
! The format of the data to be written is brother ESC or TAJIMA TFD.
1.
Press the
The embroidering data stored in the memory is displayed.
2.
The list of the embroidering data is displayed. Select the screen by pressing
3.
Select the embroidering data to be written with numeric keys or
4.
Press the
5.
Designate the thread trimming feed number with
It cannot be designated when the ECS data format is selected.
Use numeric keys,
In any data format other than the ECS format
6.
Highlight the icon of the data format with
with
.
7.
Highlight the edit value validating or invalidating icon with
invalidating of the edit value with
8.
Set the formatted floppy disk.
button.
W0476Q
W0480Q
button.
, or the
button to change the file name.
W0599Q
.
BE-1204B-BC • BE-1206B-BC
Chapter 3 Selection of Data and Embroidering
.
In the ECS data format
and designate the format of the data to be written
.
.
W0448Q
and designate validating or
3-21