Tape Reader Input Setting - Brother BE-1204B Instruction Manual

Tape Reader Input Setting

The followings describe how to input data from the tape reader.
! Tape reader is required in the registration of tape data.
! Confirm that the tape reader is connected properly to the operation panel before the operation.
! Compatible data formats for the reading are the followings:
• TAJIMA
• BARUDAN
• ZSK
! The data transfer rates of the tape reader and the embroidery machine have to be synchronized
each other before sewing.
! The stored data in the memory is titled as "Tape Date".
1. Turn on the power switch of the tape reader.
2. Set the tape to read after the READ button is illuminated.
3. Set device to read from to
Refer to "Automatic input setting" (→ page 5-34) for the setting procedure.
4. Press four times.
The tape data selection screen is shown.
Power switch
READ button
Paper tape
memory.
W0593Q
W0416Q
BE-1204B-BC • BE-1206B-BC
Chapter 3 Selection of Data and Embroidering
W0414Q
3-11