Chapter 5 Setting
Setting of Needle Bars
Needle bars allocated in the sequence of sewing can be modified.
! This setting is explained on the basis of the BE-1206B-BC screen.
! Either feedhold or hoop retract can be inserted.
1.
Press
.
2.
Select a sewing sequence to modify by pressing
The current embroidering sequence is selected while embroidering is interrupted.
Press
for modifying all sequences at one time.
3.
Input the number of a needle bar by pressing ten keys.
When inputting a numerical figure exceeding 10, press the
Insertion of Feedhold
Press
to highlight the position right next to the position to insert the feedhold, then press
Insertion of Hoop Retract
Press
to highlight the position right next to the position to insert the hoop retract, then press
5-4
W0481Q
W0482Q
W0483Q
W0484Q
W0486Q
BE-1204B-BC • BE-1206B-BC
.
first.
.
.