Chapter 1 Preparations of operation
4-4 Attachment of Embroidery Hoop and Frame
! ! ! ! Tubular square hoop
1.
Loosen the thumb bolt M6 [1] to draw it to the center.
2.
Align the positioning hole on the tubular round arm frame [4] with the positioning pin [3] (S58665)
on the X-feed sash [5] (S58650), and fit the tubular round arm fixing nut [2] on the back side of the
thumb bolt M6 [1] into the hole on the X-feed sash.
3.
While keeping the nut in the hole, slide the thumb bolt M6 toward the edge and tighten it firmly at
the outermost point.
1-20
[4]
BE-1204B-BC • BE-1206B-BC
[1]
[2]
[3]
[5]
W1243Q