Attaching Bobbin Winder - Brother BE-1204B Instruction Manual

Chapter 11 Connection and Installation of Optional Equipment

1. Attaching Bobbin Winder

[3]
1. Mount two pieces of bobbin stand L [2] on the thread winder stay [1] with nut 4 [10].
2. Mount the thread winder assembly (set) [3] on the thread winder stay [1] with the tightening screw
[11].
Mount the thread guide [4] with the drilling bolt set 6 × 20 [14] and nut 6 [13].
3.
4. Mount the spool shaft B [5] and pan [6], spool mat [7], and spool cushion [8] with nut 5 [15] and
spring washer [16].
5. Insert the thread winder harness [9] in the 2P (No. 6) connectors on the rear of the control box.
11-2
[4]
[14]
[1]
[11]
[10]
[13]
[9]
BE-1204B-BC • BE-1206B-BC
[8]
[7]
[2]
[16]
[15]
[10]
[5]
[6]
W1327Q