Registration Of Sewing Start Position; Hoop Retract Point - Brother BE-1204B Instruction Manual

Chapter 5 Setting

Registration of Sewing Start Position

Register a position to start sewing.
! When returning to a registered sewing start position, hold down
1. Press the key.
The hoop coordinates are displayed.
2. Shift the hoop to a position to start sewing by pressing the
3. Press .
4. Press the key.

Hoop Retract Point

The hoop basic point (retract point) can be set when sewing is interrupted.
! When restarting sewing after the hoop is retracted during an interrupt, press
1. Press .
2. Move the hoop by pressing
3. Press .
Modified setting is saved and the initial screen or halt screen is displayed again.
The hoop returns to the initial point.
Cancellation of Setting
1. Press once again.
Modified setting is canceled and the initial screen or halt screen is displayed again. The hoop returns
to the initial point.
5-18
W0522Q
W0523Q
W0616Q
.
Current hoop coordinates
W0525Q
BE-1204B-BC • BE-1206B-BC
and press .
.
.