Selection Of Data; Registration Of Embroidery Data From Floppy Disk - Brother BE-1204B Instruction Manual

Selection of Data

Select data in order to start sewing.
! Data to use for actual embroidering is selected from data registered in the machine memory. A
maximum of 45 kinds or 480,000 stitches of embroidery data can be registered in the machine
memory; however, depending on the combination of embroidery data, the number of pieces or total
stitches available may become less.
! When using data in a floppy disk or in BES-100E, register it in the machine memory once before
selection.
If there is no space in the machine memory, delete unnecessary data to make a space.
Data in a floppy disk
Data created by BES-100E

Registration of Embroidery Data from Floppy Disk

Register embroidery data from a floppy disk into the machine memory.
! Types of data to be registered are as shown below.
• DOS-formatted data
Data format
ECS
Tajima
Barudan
Zanks (ZSK)
Data received from BE-100
• Other data
Data format
Barudan FDR
Barudan FMC
Zanks ZSK
Registration
Sewing
Extension
Data with a name of [xxxx.ECS]
Data with a name of [xxxx.DST]
Data with a name of [xxxx.DSB]
Data with a name of [xxxx.DSZ]
Data with a name of [xxxx.STH]
(These icons are displayed in the lower right of the screen.)
(These icons are displayed in the lower right of the screen.)
BE-1204B-BC • BE-1206B-BC
Chapter 3 Selection of Data and Embroidering
Machine memory
Reading
W0394Q
Icon
Icon
3-3