Retrieve the Embroidery Data
The description in this section is based on the method of reading data which is registered in the
memory unit of the machine.
Refer to "Selection of Data" (→ Page 3-3) for details.
1.
Press
switch.
Data saved in the machine is displayed.
2.
Select a screen by pressing
.
When using ten keys for data selection, input a numerical figure (1 ~ 9) which indicates each data
name. Required embroidery data is selected and read.
3.
Press
key.
Required embroidery data is selected and read.
Selected embroidery data is read.
Start Embroidering
1.
Press
to check the embroidering area.
2.
Press
to start embroidering.
Sewing is started and the next screen is displayed.
keys, and select required data by pressing ten keys or
W0397Q
W0405Q
W0406Q
W0406Q
W0439Q
BE-1204B-BC • BE-1206B-BC
Chapter 2 Embroidering Procedures
2-9