Brother BE-1204B Instruction Manual page 50

Chapter 2 Embroidering Procedures
Moves the hoop.
Step-back or forward is available during suspension. (Use
Changes the speed range during embroidering (Use
Carries out inching of the hoop when the switch is pressed in the inching mode.
Move the cursor for selecting sewing data and an icon.
Turning on the power with
Moves the needle bar. The needle moves by the diameter every time this switch is pressed.
Change to the screen for selecting sewing data.
Operation panel
2-4
key pressed will display the test mode screen.
Contrast volume
Adjusts the screen contrast.
SBUS interface connector
Not used (Do not connects anything.)
RS-232C interface connector
Connect personal computer with BE-100 installed, etc.
BE-1204B-BC • BE-1206B-BC
switches only.)
switches only).
W1256Q