Automatic Input Setting - Brother BE-1204B Instruction Manual

Chapter 5 Setting

Automatic Input Setting

The sewing data can be read from floppy disks or personal computers by manual, automatic or full
automatic operation.
! The following items are available for the settings.
Item Contents
Choose the device to read from.
Choose the mode for the reading.
Choose whether or not to continue automatic reading from the start on completion of the sewing.
Choose whether or not to reflect the initial edit data in following sewing operations.
! To choose network as the device and to read the data via the network will require another
software and so on. Please consult our sales office or service station nearby in this case.
5-34
Reads from a memory. Only MANU (manual) mode is available in this case.
Reads from a floppy disk.
Reads from a personal computer.
Reads from a network.
MANU (Manual): The data selection for the reading can be changed manually on the
file selection screen shown each time with data reading.
AUTO (Automatic): After the completion of the sewing, pressing
the next data reading automatically.
The file selection screen is shown at the first reading only.
Data for the reading cannot be changed manually.
F-AT (Full-Automatic): The next data reading will be executed automatically after the
completion of the sewing.
The file selection screen is shown at the first reading only.
Data for the reading cannot be changed manually. This mode is not available when
the device to read from is set to network.
Discontinues data reading on completion of sewing.
Continues data reading from the start automatically on completion of sewing.
The initial edit data is reflected.
The initial edit data is not reflected.
BE-1204B-BC • BE-1206B-BC
will execute