Hoop Automatic Retract; Movement To Registered Sewing Start Point - Brother BE-1204B Instruction Manual

Hoop Automatic Retract

Set whether to move the hoop automatically to the retract point at the end of sewing.
! This function is previously set to no hoop automatic retract upon shipments.
1. Press .
2. Select whether to retract the hoop automatically by pressing
For automatically retracting the hoop
For not retracting the hoop automatically
3. Press .
Modified setting is saved and the initial screen or halt screen is displayed again.

Movement to Registered Sewing Start Point

This operation should be done before starting sewing.
1. Hold down
2. The hoop moves and the zero point is detected. Then the hoop moves to a registered start point.
3. The initial screen is displayed again.
W0526Q
W0527Q
and press .
W0617Q
W0618Q
W0619Q
BE-1204B-BC • BE-1206B-BC
Chapter 5 Setting
.
5-19