Turn On The Machine Power - Brother BE-1204B Instruction Manual

Chapter 2 Embroidering Procedures

Turn on the Machine Power

Main power switch
W1262Q
1. Turn on the main power switch.
2. Reset the emergency stop switch.
3. Change the Flat / Cap hoop select switch on the operation panel according to the hoop to be used.
4. Press the power switch.
5. A message is displayed on the LCD as soon as the power is turned ON.
6. The alarm sounds three times. The hoop moves back to the zero point and the sewing screen is
displayed.
The speed range and actual speed is displayed.
Operational icons are basically displayed; however, some icons,
such as
An angle at which the hoop feeding finishes is displayed.
2-8
Emergency stop switch
W1265Q
BE-1204B-BC
W1263Q
BE-1206B-BC
W1264Q
A sequence of changing colors is displayed.
A sequence of colors is displayed.
A total number of stitches is displayed.
A data name is displayed.
A number of colors registered in data is displayed.
A kind of hoop is displayed.
, may not be on the screen.
BE-1204B-BC • BE-1206B-BC
Flat / Cap hoop select switch
W1404Q
Power switch
W1266Q
W0406Q