W 2] Writing Additional Sewing Data To; An Sd Card - Brother BAS-311H Service Manual

5-5. [ w 2] Writing additional sewing data to an SD card
1 Select the " w 2" SD data read/write mode.
2
For example, if the additional sewing data
to be written is for program No.200.
3
4
Exit read/write mode
5
While writing
Additional sewing data number
being written appears in the tension
display.
2660B 2658B
TEST indicator switches off
･
The numbers for the additional sewing data in the
sewing machine memory will appear in the tension
display.
(The initial value displayed is "ALL".)
3208B
Press the or
additional sewing data that you would like to write (ALL,
001 to 999).
･
When "ALL" is displayed, all of the additional sewing
data will be read at once.
･
The additional sewing data numbers displayed will
only be those that are in the sewing machine
memory. (If there is no data in the memory, "ALL" will
be the only thing displayed.)
2656B
Press the ENTER key.
･
The buzzer will sound and the selected sewing data
will be written to the SD card.
･ If no additional sewing data exists, an error buzzer
will sound.
When the display returns to the status in step 1, writing
of the additional sewing data is complete.
･
If you would like to use any other read/write modes,
press the △ or ▽ key to select the mode and then
run it.
2659B
Press the TEST key.
2404B
BAS-311H
5. USING SD CARD
key to select the number for the
2414B
40