Oiling; Head - Brother BE-1204B Instruction Manual

Chapter 7 Maintenance

2. Oiling

Supply oil to the following places at regular intervals.
• When oiling, be sure to supply
the dropper.
• Excessive oiling may cause the material to be stained.
• Be sure to wipe off excessive oils with waste cloth etc.

2-1 Head

! Supply one or two drops of oil to each needle bar from the oil supply holes of the lower cover daily.
! Lubricate the felt on the top surface of the head once a week.
7-4
Brother's specified oil (Nippon Oil, Embroidery Lube 10N; VG10)
BE-1204B-BC • BE-1206B-BC
W1221Q
Felt
W1291Q
using