Writing Error Log Data And Memory Switch Log Data To An Sd Card - Brother KE-430F Service Manual

7-12. Writing error log data and memory switch log data to an SD card

1
2
3
Ending read/write mode
4
While writing
"LoG" appears in the tension
display while log data is being
written
TEST indicator switches off
Select the " w9" SD data read/write mode.
(Refer to "7-3. Preparation for reading and writing data".)
2673B
Press the ENTER key.
・ The buzzer will sound and the error log data and
memory switch log data will be copied to the SD card.
2674B 2675B
When the display returns to the status in step 1, writing of
the log data is complete.
・ If you would like to use any other read/write modes,
press the
run it.
2673B
Press the TEST key.
2404B
KE-430F, BE-438F
7. USING SD CARDS
or key to select the mode and then
2414B
53