Automatic Lock Stitch Setting - Brother 884-T23 Operation Manual

■ In the [Manual Color Sequence] mode
1
2
Display
No.
Key Name
This icon appears when the
1 Manual color
machine is in the [Manual
sequence
Color Sequence] mode.
mode icon
Change the needle bar color
setting.
2
This key appears when you
Manual color
set [Manual Color Sequence]
sequence key
to [ON] in settings screen.
72
Function Page
60
60

Automatic lock stitch setting

When the machine is purchased, it is set to automatically
embroider lock stitches at the beginning of the pattern, before
embroidering after each thread color change, and before
trimming the thread.
Memo
• Automatic lock stitching cannot be applied to
patterns whose jump stitches will not be trimmed
( ). (page 49)
■ To change the lock stitches being embroidered
at the beginning of the pattern, at the
beginning of embroidering each thread color
change and at the beginning of embroidering
after the thread trim.
a Make sure that the lock stitching (beginning) key
appears as .
• Each touch of the key turns the setting either on or off.
Automatic lock
stitch setting turned
on
Memo
• If the first stitch length is less than 0.8 mm (1/32
inch), the lock stitch won't be inserted.
■ To change the lock stitches being embroidered
before the thread is trimmed.
a Make sure that the lock stitching (end) key appears as
.
• Each touch of the key turns the setting either on or off.
Automatic lock
stitch setting turned
on
Memo
• The automatic lock stitch setting stays the same
until the key is touched again. The setting specified
before the machine is turned off remains selected
the next time that the machine is turned on.
Automatic lock
stitch setting turned
off
Automatic lock
stitch setting turned
off